WHERE CAN I GET ONE OF THESDE IN AUSTRALIA

Farkleit

Premier Member
#21
Brian you may find a "bulkhead fitting"at your local hydraulic's service. They are not rear as such. You just need to know what size internal fitting/ the pipe line diameter you want to run.
Speed flow and all those mentioned above can supply the item called a bulk head fitting.
Bulk head fitting can range from under 5mm up to 300mm as a screw in item.
Youngs Hydraulics in Tamworth have them as do BearFast.
Earls, SpeedFlow and speedWorks and hells bells ...do you have a chandlers supplies near you. It is after all a common boat part.

No promises but I'll have a look in one of my magic box's to see if I still have one and bring it along to Renmark for you.
Did u fi d one? The supllier in Aus is moving warehouse.
My mate Tory will be in renmark.
 

Fransvdm

Premier Member
#26
Picked up the material today. Just now to weld it all together

Now if you need a good welder, a really good welder, who can weld that together for you with a guaranteed no leak job that will outlast your lifetime, and where people will ask you: "Who did that fantastic welding job?"

Then don't call me. I repeat, don't call me !! :D:D:D:D

You're going to have a busy easter weekend. No cadbury choclates
 

Farkleit

Premier Member
#38
Had a fellow from Autobarn source these zero loss QD with 1/4 barbs each end. Very compact in size

Got onto finishing the top deck to
Drilled and coyntersunk the screws. Need to grab a few more to finish it. Its held in place with nutserts