After the first SS1000 on the Trophy it was apparent that I needed to install some risers as my long torso made the reach a little too far forward after years of cruiser riding. There's not a lot of options in the market right now so I found a homemade solution on the Trophy forum.
Basically it is installing some chrome spacers under the bars and using some longer bolts to secure. The suggestion was to purchase from www.BoltDepot. com the following:
#6439 - Metric socket cap, Stainless steel 18-8, 8mm x 1.25mm x 45mm - $0.75 each x 6 pieces = $4.50
#13697 - Spacers, Chrome plated grade 2 steel, 5/16" x 1" (5/8" O.D.) - $3.81 each x 6 pieces = $22.86
Subtotal $27.36
Shipping $7.95
Total $35.31
I believe that the bolts are a little more expensive now as my total came up to around $40. Bolt Deport had my order on my doorstep in 2 days. Installation took less than 15 minutes and it works great.
Basically it is installing some chrome spacers under the bars and using some longer bolts to secure. The suggestion was to purchase from www.BoltDepot. com the following:
#6439 - Metric socket cap, Stainless steel 18-8, 8mm x 1.25mm x 45mm - $0.75 each x 6 pieces = $4.50
#13697 - Spacers, Chrome plated grade 2 steel, 5/16" x 1" (5/8" O.D.) - $3.81 each x 6 pieces = $22.86
Subtotal $27.36
Shipping $7.95
Total $35.31
I believe that the bolts are a little more expensive now as my total came up to around $40. Bolt Deport had my order on my doorstep in 2 days. Installation took less than 15 minutes and it works great.